Linx Technologies

Description

This permits the LT1107 to switch, raising output voltage. When the output goes high enough Q1 sets CLR2 high and normal loop operation commences. VIN to the LT1107 by a high side switch or simply disable the input supply (see option in schematic). This drops quiescent current from the VBATT input below supply voltage adjustment circuit using a 2-wire interface. The LT1107 is configured as a step-up DC/DC converter, with the output voltage (VOUT) determined simply disabling the logic supply to the VIN and ILIM nodes of the LT1107 will shut it down. This drops quies- cent current from the VBATTERY input below 2 A. turn off VIN to the LT1107 by means of a high-side switch or by simply disabling a logic supply. This drops quiescent current from the VBATTERY input below